Pneumatically actuated SPIRA-TROL For critical process control, which may be subject to high capacities or poor steam conditions or where integration with supervisory control systems is a requirement then a pneumatically actuated valve should be used. Pneumatic control valves are ideal for pressure control applications where rapid changes in system conditions occur. The SPIRA-TROL valve is modular in design offering many options within one body envelope, this provides a comprehensive selection of control valve, allowing for pressure control of steam, water, oils and other industrial fluids. The SPIRA-TROL valve is complemented by the availability of a full range of controllers and transmitters. It is this highly flexible system which allows one valve to satisfy the needs of numerous industrial requirements. Technical specification Screwed ½" to 2" Sizes Socket weld ½" to 2" Flanged DN15 to DN200 Screwed BSP and NPT Socket weld End connections PN16, PN25 and PN40 Flanged ASME (ANSI) 125, 150 and 300 JIS / KS 10 and JIS / KS 20 Cast iron SG iron Body materials Carbon steel Stainless steel NACE Maximum temperature 400°C Maximum body PN40 and ASME (ANSI) 300 design rating Control pressure range 0 to 40 bar Equal percentage Flow Linear characteristics Fast opening Reduced flow including microflute characteristics Low noise Special trims Soft seal Hard facing Options Spring loaded chevron and 'O' ring Stem seals Graphite Bellows Bonnet extension Pneumatic Actuation Electric Modulating On / Off For further technical information, search our website using product designation SPIRA-TROL