产品搜索
请输入产品关键字:
暂无信息 |
联系方式
技术文章
德国-高低温冲击试验箱
点击次数:499 发布时间:2011-1-8
Vötsch – Thermal Shock Test Cabinet--Model VT 7012 S2
德国-高低温冲击试验箱--型号VT 7012 S2
Performance data性能参数
Temperature range of
hot chamber热箱温度范围 from +50 °C to +220 °C
Temperature range of
cold chamber冷箱温度范围 from -80 °C to +70 °C
Hot or cold chamber may also be utilized as individual temperature chamber.
热箱或冷箱分别可作为单独温度试验箱使用
热箱或冷箱分别可作为单独温度试验箱使用
Temperature deviation in time
in centre of working space
工作室中心点随时间温度偏差 ±0.3 K to ±1.0 K
Temperature deviation in space
空间温度偏差 ±0.5 K to ±2.0 K
Calibration values校准点 -40 °C cold chamber and +125 °C hot chamber
冷箱-40 °C和热箱+125 °C
冷箱-40 °C和热箱+125 °C
Heating rate of hot chamber
according to IEC 60068-3-5
按照IEC 60068-3-5热箱升温速率 13 K/min.
Cooling rate of cold chamber
according to IEC 60068-3-5
按照IEC 60068-3-5冷箱降温速率 5,3 K/min.
Heating rate of cold chamber
according to IEC 60068-3-5
按照IEC 60068-3-5热箱降温速率 2 K/min.
Temperature changing tests: MIL 883 E, Method 1010.7, Severity D with 12 kg of IC''''s
distributed over 3 shelves; measurement on test speci-mens
温度变化试验:按MIL 883 E, Method 1010.7, Class D,
12 kg的IC’s , 分散于3个样品架,在试验样品上测量
Adaption time < 15 min.恢复时间小于15分钟
The following standards are met
满足的试验标准 DIN 40 046, page 14, test Na,
transfer time < 10 sec.;
IEC-60068-2-14, test Na,
transfer time < 10 sec.;
MIL-STD-810 E, method 503;
MIL-STD-883 E, method 1010.7
variants A,B,C,D,F
JEDEC standard JESD22-A101-A
Test space dimensions
试验空间尺寸 470 mm wide 宽
650 mm deep 深
410 mm high 高
Standard features ...主机标准配置
· Powder coated housing made of galvanised steel sheet
· 粉末喷涂镀锌钢板外壳
· Window, 355 mm x 355 mm, in the hot chamber
· 热箱配置观察窗355 x 355 mm
· 1 Ultra-lightweight shelf incl. rails1个轻质样品架,包括导轨
· Cradle in loading position locked吊篮在装载样品位置被锁定
· Max. loading capacity of cradle 50 kg吊篮zui大负载能力50 kg
· 80 mm leadthrough直径80 mm引线孔
· volume compensation system for long-term operation
· *操作使用大容量补气系统
· water-cooled refrigeration unit水冷却制冷系统
· CFC-free refrigeration cycle全封闭无氟制冷循环
· Comfortable Color-Touchpanel彩色触摸式控制器
· Highly efficient 32 bit control and monitoring system
SIMCON/32 NET /32位控制和监测系统SIMCON/32 NET
SIMCON/32 NET /32位控制和监测系统SIMCON/32 NET
· Digital-I/O, potential-free 24 V, 4 freely disposable inputs/outputs
· 数字式I/O,零电势24V,4个可自由选用的输入/输出
· Independent adjustable temperatur limiter tmin/tmax in cradle
· 吊篮中的独立的、可调节的温度限制器,zui低温度/zui高温度
· Potential free contact for switching-off of test specimens
· 用于试验样品开关的无电势接触器
· adjustable software temperature limiter min/max
· 可调节的软件温度限制器,zui低温度/zui高温度
· Serial interface 接口RS 232
· Trend display试验状态显示
· Cycle couter, total no. of cycles / remaining run time
· 循环计数器,总试验循环计数器/剩余运行时间
· Operating hour counter工作小时计数器
· European socket欧洲型插座
· Temperature control using movable sensor in cradle or
alternatively fixed sensor in hot or cold zone
alternatively fixed sensor in hot or cold zone
· 温度控制用吊篮中移动传感器或更换冷温箱或热箱中的固定传感器
· Defrosting cycles automatic and programable自动除霜和程序除霜
· Dwell time start programable可编程计算停留时间
· Already programed and may be called up at any time:
MIL 883 E, method 1010.7 Intensity of test A,B,C,D,F
MIL 883 E, method 1010.7 Intensity of test A,B,C,D,F
· 随时可以调用已经固化的试验程序,美军标准MIL 883 E, method 1010.7 intensity of test A B,C,D,F
· Calibration of 2 temperature values2点温度值校正
· 1 Operating instruction操作手册一套