小型喷雾干燥器
：方传珍
厂家：
*通知：为了回馈新老客户，JOYN品牌氮气吹仪和固相萃取仪，索氏提取器，低至4折销售。
产品说明:
JOYN-8000T小型实验室喷雾干燥器主要适用于高校、研究所和食品医药化工企业实验室生产微量颗粒粉末，对所有溶液如乳浊液、悬浮液具有广谱适用性,适用于对热敏感性物的干燥如生物制品、生物农药、酶制剂等，因所喷出的物料只是在喷成雾状大小颗粒时才受到高温，故只是瞬间受热，能保持这些活性材料在干燥后仍维持其活性成份不受破坏。
小型喷雾干燥器
主要特征:
1.喷雾干燥器采用彩色大触摸屏操作，全自动控制和手动控制相结合，国内*：
2.全自动控制：一键式开器，设定喷雾工艺参数后，温度到达预定温度，蠕动泵自行启动，触摸屏上显示运行动画，运行流程清晰显示；关器时只需按停止键，器器自动安全关器。
3.手动控制：如需在实验过程对工艺参数进行调整，可方便切换至手动状态，整个实验过程彩色触摸屏动态显示（动画）。
4.关器保护功能：关器时只需按停止键，器器除风器外立即停止运行，保证设备不会因为误操作（强行关风器）而导致加热部分烧坏。
5.喷雾、烘干及收集系统采用透明的优质高硼硅耐热玻璃材料制造，使得喷雾干燥过程在无污染及zui稳定的环境下进行，且使整个喷雾干燥实验进程可直接观察，为科研人员掌控实验进程及实验结果提供了*的便利,并能及时发现解决问题。所有玻璃元件易拆卸，易清洗。
6.小型喷雾干燥器内置进口全无油空压器，喷粉的颗径呈正态分布，流动性非常好，而且噪音非常低，小于60db，符合国家实验室噪音标准；
7.二流体喷雾的雾化结构，整器采用优质不锈钢材料精密制造，设计紧凑，无需附属设备，方便使用，历久如新。
8.为了满足用户在实验范围调节各项参数的要求，在干燥温度控制的设计上采用实时调控PID恒温控制技术，使全温区控温准确，加热控温精度±1℃。
9.为了保持样品的纯净，配备了进风口过滤器。
10.进料量可通过进料蠕动泵调节，zui小样品量可达50ml。磁力搅拌器可选
11.干燥后的成品干粉，其颗粒度较均匀，95%以上的干粉在同一颗粒度范围。
12.小型喷雾干燥器针对黏性物料，设有喷咀清洁器（通针），在喷咀被堵塞时，会自动清除，通针的频率可自动调整；
13.创新的塔壁吹扫装置，物料回收率更高。
小型喷雾干燥器
技术参数:
1）喷雾干燥器全自动控制与手动控制双重控制模式，整个实验过程彩色触摸屏动态显示（动画）
2）进风温度控制：30℃～300℃
3）出风温度控制：30℃～140℃
4）蒸发水量：1500mL/H～2000ml/h
5）zui大进料量：蠕动泵可调zui大为2000ml/h
6）zui小进料量：50mL
7）可升级成双级分离收集系统
8）实时调控PID恒温控制技术，加热控温精度：±1℃
9）干燥时间：1.0～1.5S
10）小型喷雾干燥器具有关器保护功能：关器时只需按停止键，器器除风器外立即停止运行，保证设备不会因为误操作（强行关风器）而导致加热部分烧坏。
11）彩色LCD触摸屏参数显示：进风口温度/出风口温度/蠕动泵转速/风量/通针频率
12）喷嘴口径：0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm可选，并可根据要求定制
13）设有喷咀清洁器（通针），在喷咀被堵塞时，会自动清除，通针的频率可自动调整
14）喷雾干燥器整器全不锈钢制作,二流体喷雾的雾化结构，喷雾、烘干及收集系统采用透明的优质高硼硅耐热玻璃材料制造
15）内置进口全无油空压器，喷粉的颗径呈正态分布，流动性好，而且噪音非常低，符合国家实验室噪音标准；
16）整器功率：3KW/220V
17）塔壁吹扫装置，物料得率更高
18）喷雾头冷却装置（可选）
19）可直接升级成应用于有器溶剂物料干燥的氮气循环系统
20）设备尺寸：1200mm（高）×650mm（长）×500mm（宽）
公司：http://www.shjoyn.com/ , http://www.joyn2012.com/
：方传珍
厂家：
小型喷雾干燥器
英文翻译：
A small spray dryer
Product description:
JOYN - 8000 - t spray dryer is mainly suitable for small laboratory in colleges and universities, research institutes and food medicine and chemical industry enterprise laboratory trace particles of powder production, such as emulsion, suspending liquid has a broad spectrum of all solution applicability, suitable for drying thermal sensitivity material such as biological products, biological pesticide, enzymes, because of overflowing material only when sprayed into mist particle size under high temperature, it is just instant heating, can maintain the active material in dry hind still maintain its active ingredients are not destroyed.
Main features:
1. The spray dryer large color touch-screen operation, automatic control and manual control, the combination of domestic only:
2. Automatic control: open one key, set after spraying process parameters, temperature reach the predetermined temperature, peristaltic pump to start, run animation displayed on the touch screen, run the process clear display; GuanQi, simply press the stop button when the device is safe GuanQi automatically.
3. Manual control: if you want to adjust the process parameters in the experimental process, easy to switch to manual mode, the whole experiment process color touch screen dynamic display （animation）.
4. GuanQi protection function: GuanQi, simply press the stop button when the device is in addition to the wind device immediay stop running, ensure equipment don't because of wrong operation （forced off the wind） and cause heating part of the burn out.
5. Spray, drying and collecting system adopts transparent quality high borosilicate heat-resistant glass materials, spray drying process under the environment of free from contamination and the most stable, and can be directly observed the whole process of spray drying experiment, for scientific research personnel control experiment process and the result of the experiment provides a great convenience, and can be found to solve problems in a timely manner. All glass components easy disassembly, easy to clean.
6. A small spray dryer built-in import all the oil air compressor, powder particles diameter normally distributed, liquidity is very good, and very low noise, less than 60 db, accord with national standards for laboratory;
7. Two fluid spray atomization structure, the whole machine is made of high quality stainless steel materials, precision manufacturing, compact design, without ancillary equipment, easy to use, is like new.
8. In order to meet the requirements of users in the experimental range adjustment parameters, on the design of the drying temperature control USES the real-time regulation of PID temperature control technology, make the temperature range of the accurate temperature control, heating temperature control precision of + / - 1 ℃.
9. In order to keep the sample of pure, is equipped with air inlet filter.
10. Feed rate can be adjusted through feed peristaltic pump, minimum YangPinLiang can reach 50 ml. Magnetic stirrer is optional
11. The dried powder products, its granularity is even, the granularity of more than 95% of the dry powder in the same range.
12. A small spray dryer for viscous material, equipped with nozzle cleaner （needle）, when the nozzle blockage, will automatically be removed, can automatically adjust the frequency of needle;
13. The innovation tower wall purging device, material recovery rate is higher.
Technical parameters:
1） spray dryer automatic control and manual control dual control mode, the whole experiment process color touch screen dynamic display （animation）
2） the inlet air temperature control: 30 ℃ ~ 300 ℃
3） the wind temperature control: 30 ℃ ~ 140 ℃
4） the evaporation of water, 1500 ml/H ~ 2000 ml/H
5） the largest feed: peristaltic pump can be adjusted up to 2000 ml/h
6） the minimum feed rate: 50 ml
7） can be upgraded to the two-stage separation collection system
8） real-time regulation of PID temperature control technology, the heating temperature control precision: + / - 1 ℃
9） the drying time: 1.0 ~ 1.5 S
10） small spray drying equipment related protection function: GuanQi, simply press the stop button when the device is in addition to the wind device immediay stop running, ensure equipment don't because of wrong operation （forced off the wind） and cause heating part of the burn out.
11） color LCD touch screen parameters show that the inlet/outlet temperature/peristaltic pump speed/air/frequency of needle
12） nozzle diameter: 0.5 mm / 0.7 mm / 0.75 mm / 1.0 mm / 1.5 mm / 2.0 mm optional, and can customize according to the requirements
13） equipped with nozzle cleaner （needle）, when the nozzle blockage, will automatically be removed, the frequency of needle can be adjusted automatically
14） spray dryer whole full stainless steel, two fluid spray atomization structure, spraying, drying and collecting system adopts transparent quality high borosilicate heat-resistant glass materials
15） built-in imported oil-free air compressor machine, spray the powder size normally distributed, good liquidity, and the noise is very low, in line with national standards for laboratory;
16） the whole power: 3 kw / 220 v
17） the tower wall purging device, the material yield is higher
18） spray head cooling device （optional）
19） can be directly upgraded to applied in solvent materials dry nitrogen circulation system
20） equipment size: 1200 mm （high） （long） x 500 mm x 650 mm （wide）
Company website: http://www.shjoyn.com/, http://www.joyn2012.com/
Contact: Fang Chuanzhen
Manufacturer hotline:
