PR6202/10TC1  柱式称重传感器            PR6202/10TC1  柱式称重传感器

深圳市汉斯福特科技有限公司

：

Q  Q: 3174269615

公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼

公司：www.huntsort。。ｃｏｍ

概述

The PR6202 range of load cells is specially designed to meet the high demands of the food, pharmaceutical and chemical industries. These products are made compley from stainless steel and are specially designed for use with process vessels. All horizontal surfaces are inclined for easy draining, and gaps and undercuts have purposely been avoided. The materials and surface quality were also selected to ensure the load cell meets tried and tested international standards and specifications.

特性

1t… 50t, Typ C1/C3/C4

1. Proven rocker-pin principle

2. Easy Corner adjustment by matched load cell outputs

3. Full stainless steel construction

4. Wide operating temperature range

5. High overload capacity

6. Resistant against vibration

7. Hermetically sealed, IP68 (depth of 1.5m for 10,000 hours), IP69K, (equiv. NEMA 6)

8. Ex-version available (PR 6202/..E)

9. W & M approval (acc. to OIML R60)

10. Meets EHEDG requirements

11. Registered Design Nos.

EU 000 210 349-0001/-0002

JP 2005 - 478

US 22/222, 249

参数

Technical Data C1 C3 C4

Accuracy class 0.03 0.015 0.012 % Emax

Minimum dead load lowest limit of specified measuring range Emin 0 0 0 % Emax

Rated capacity highest limit of specified measuring range Emax s. table s. table s. table

Max. usable load upper limit of measurements Eu 150 150 150 % Emax

Destructive load danger of mechanical destruction Ed > 300 > 300 > 300 % Emax

Minimum LC verification minimum load cell verification interval, vmin = Emax/Y Y 5,000 14,000 16,000

for Emax = 2t 5,000 10,000 -

for Emax = 1t 5,000 - -

Deadload output return factor for dead load output return after load

(DR = 1/2*Emax/Z) Z 1,000 3,000 4,000

Rated output relative output at nominal load Cn 2 2 2 mV/V

Tolerance on rated permissible deviation from rated output dc < 0.25 < 0.07 < 0.07 %Cn

output

Zero output signal load cell output signal Smin < 1.0 < 1.0 < 1.0 %Cn

under unloaded condition

Repeatability error max. change in load cell output for repeated loading εR < 0.01 < 0.005 < 0.005 %Cn

Creep, during 30min max. change in load cell output under nominal load dcr < 0.03 < 0.015 < 0.0125 %Cn

Non-linearity max. deviation from best straight line through zero dLin < 0.03 < 0.01 < 0.01 %Cn

Hysteresis max. difference in LC output between loading

and unloading dhy < 0.03 < 0.015 < 0.0125 %Cn

订货型号

Type Rated Version Max. usable load Destructive load Packing Weight gross/net

Capacity Emax (in % of Emax) (in % of Emax)

PR6202/1t 1t C1/C1E 150 > 300 240 x 240 x 155mm 2.1kg/1.2kg

PR6202/2t 2t C1/C3/C1E/C3E 150 > 300 240 x 240 x 155mm 2.1kg/1.2kg

PR6202/4t 4t C1/C3/C4/C1E/C3E/C4E 150 > 300 240 x 240 x 155mm 2.1kg/1.2kg

PR6202/6t 6t C1/C3/C4/C1E/C3E/C4E 150 > 300 240 x 240 x 155mm 2.1kg/1.2kg

PR6202/10t 10t C1/C3/C4/C1E/C3E/C4E 150 > 300 240 x 240 x 155mm 2.5kg/1.6kg

PR6202/25t 25t C1/C3/C4/C1E/C3E/C4E 150 > 300 240 x 240 x 155mm 3.7kg/2.8kg

PR6202/50t 50t C1/C3/C4/C1E/C3E/C4E 150 > 300 240 x 240 x 155mm 4.1kg/3.2kg