测试账号使用
测试账号使用
1KVA 交流耐压测试仪 7480,大功率交流耐压测试仪提供输出电流200mA，符合特殊应用法规要求高跳脱电流 （Ir）与短路电流 （Is），适用于家电类与高压空调系统类产品的安规，以及含有高漏电流之大容量电容测试
1KVA 交流耐压测试仪 7480。*业界的1,000VA耐压测试仪专门设计用于大电流产品，例如汽车和零部件行业需要大容量负载的产品。
1KVA 交流耐压测试仪 7480安全特性与产品特点:智慧防高压触电线路;电弧侦测
提供输出电流高达200mA，*符合IEC60335(GB4706) ，IEC60598(GB7000) ， IEC60590(GB4943)之跳脱电流 (Ir)100mA与短路电流 (Is)200mA 。
1KVA 交流耐压测试仪 7480可依据不同被测物的属性，弹性的设定缓升(Ramp up)与缓降(Ramp down)功能，有效调整测试电压上升与下降速度时间长短。
业界指针性的ARC电弧侦测功能，许多大厂的测试标准，可透过侦测被测物异常电流回路，筛选出线路短路不良品，避免微小锡渣及绝缘空间不足等因素造成产品日后绝缘崩溃，提高制造生产质量。
支持界面：RS232
1KVA 交流耐压测试仪 7480技术参数
| MODEL | 7480 | ||
| AC WITHSTAND VOLTAGE | |||
| Output Rating | 5kVAC / 200mA | ||
| Range | Resolution | Accuracy | |
| Output Voltage, ACV | 0-5000 | 10 | ± (2% of setting + 10V) |
| Output Frequency | 50Hz/60Hz ±0.1%, User Selection | ||
| Output Waveform | Sine Wave ,THD: <2% at 300Vrms or higher voltage(Resistive Load), Crest Factor = 1.3 - 1.5 | ||
| Output Regulation | ± (1% of output + 10V), From no load to full load | ||
| SETTINGS | |||
| Hi / Lo-Limit AC current, mA | 0.00-99.99 / 100.0-200.0 | 0.01/0.1 | ± (2% of setting + 2 counts) |
| Ramp-Up Timer, second | 0.1-999.9 | 0.1 | ± (0.1% + 0.05 sec) |
| Ramp-Down Timer, second | 0.0-999.9 | ||
| Dwell Timer, second | 0, 0.3-999.9 sec (0=continuous) | ||
| 0, 0.1-999.9 min (0=continuous) | |||
| 0, 0.1-999.9 hr (0=continuous) | |||
| Arc Detection | The range is from 1-9(9 is the most sensitive) | ||
| AC Current Offset, mA | 0-2.000, auto / manual set | ||
| MEASUREMENT | |||
| AC Voltage, KV | 0-5.00 | 0.01 | ± (1.5% of reading)≥500V ± (1.5 % of reading +1 count) < 500V |
| AC Current, mA | 0.00-20.00 | 0.01 | ± (2% of reading +3 counts) |
| 20.1-200.0 | 0.1 | ||
| GENERAL | |||
| Input Voltage AC | 230VAC±10%, 50/60Hz(Input 110V has to add Transformet Box) | ||
| PLC Remote Control | Input : Test, Reset, Memory 1,2,3, Interlock | ||
| Output:- Pass, Fail, Processing | |||
| External Scanner Poert | Built-in only one scanner port to connect 7006 Matrix Scanner. | ||
| Safety | Smart GFI Function (<1mA) | ||
| Memory | 50 memories | ||
| Display | 20 x 2 LCD with back light | ||
| Key Lock | To prevent unauthorized alteration of the test parameters | ||
| Calibration | Built-in software and external calibrated meters | ||
| Interface | Optional RS232 | ||
| Alarm Volume Setting | Ranger: 0-9; 0=OFF, 1 is softest volumne, 9 is loudest volume | ||
| Environment | 0-40℃, 20-80%RH | ||
| Dimensions(W×H×D), mm | 430×133×500 | ||
| Net Weight | 24.4kg | ||
| STANDARD ACCESSORIES | |||
| Power Cord | ×1 | ||
| Fuses | ×2 (Including a spare contained in the fuse holder) | ||
| Interlock Disable Key(1505) | ×1 | ||
| Hipot Return Lead | ×1 | ||
| Hipot Test Lead | ×1 | ||
| *product specifications are subject to change without notice. | |||
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
亚洲建材网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
