济南新五岳机器厂
济南新五岳机器厂
◆锯片主轴采用高精密主轴
◆装有数显装置定位精度高。
◆切割进给运动与机头的左右移动导轨
◆锯片进给由液压阻尼气缸提供动力
◆加工范围大，
◆后托料架自动伸缩
◆安全罩安全性好
◆气控阀控制摆角气缸
| 铝型材数显双头切割锯LJB2S-500×4200 Double-head Cutting Saw for Aluminurm Profile LJB2S-500×4200 |
 |
| ◆锯片主轴采用高精密主轴，进口硬质合金锯片 ◆装有数显装置定位精度高。 ◆切割进给运动与机头的左右移动导轨，均采用进口直线轴承运动副 ◆锯片进给由液压阻尼气缸提供动力 ◆加工范围大，切割长度达4200mm，切割角度为90°、45°、22.5°，三种角度按钮自动转换 ◆后托料架随活动机头的运动场自动伸缩 ◆安全罩随锯片的进、退自动起落，安全性好 ◆气控阀控制摆角气缸，避免电磁阀*带电引起失效 The main axle of the saw is made precisely highly , and isspecialized for the hard alloy saw.The go and back of the cutting can synchronous with the left and right moving of the head of the machine , is made by the linary bearing pair . The moving of the saw is motivated by the hydraulic damper cylinder . The range of the production is vrery large , and the length of cutting caul arrive 4200mm , the cutting angles are 90,45 and 22.5. They can change into another automatically. The frame carl go and back automatically with the head of the machine . The safety precaution can up and down with the saw safely . The tyre air valves control the corner cylinder , and avid the electricity of the machine. |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
亚洲建材网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
